Why Buy From Chain Hoist
- Fast response times from experienced specialists
- Expert guidance for industrial equipment selection needs
- Trusted industrial equipment brands with proven performance
- Clear communication throughout the shipping process
- Reliable support before and after purchase
1/2 Ton Elephant ATS Series 62 FPM Hook Mount with Pull Cord Control
| Manufacture Part Number | ATSI-050-LIFT-PC |
|---|---|
| Brand | Elephant |
| Estimated Ship Time | 4-5 Business Days |
Division 1 (Spark-Resistant air hoists are required)
Atmospheres containing hazardous concentrations of flammable gases, dusts, or fibers, continuously, frequently or periodically, under normal operating conditions.
Division 2 (Standard air hoists are required)
Atmospheres, normally non-hazardous, in which a hazardous concentration of flammable gases, dusts, or fibers, occurs when a container or handling system fails, or the ventilating system which normally keeps the concentration non-hazardous fails
Additional features and benefits include:
- 0.25t ~ 10 ton
- Overload Protection Safety Device, Standard on 1t Capacity and Greater
- A High Quality Urethane Paint
- Heavy Duty Single Braid Wire Reinforced Air Hose with Swivel Fittings on each end
- Galvanized Load Chain for Corrosion Resistance
- Meets ASME B30.16 standards
- Pendant Control Machined from Solid Brass for Corrosion Resistant and Spark Resistance with an Emergency Stop Button. Available in Aluminium as well.
- Upper Hook with a Safety Factor of 5X the Nominal Load
- Low-maintenance lubrication free Rotary Vane Motor for clean use within Food Grade, Petrochemical, and Pharmaceutical Environments
- Heat Treated and Rust-Free Motor Components with Removable Stainless Steel Cylinder, Allow for Operational Longevity and Low Cost Replacement
- Air Valve is 100% Nickel Plated inside and out for Corrosion Resistance.
- Infinitely Variable Speed Via Pull Cord Control
- Atex approved, EX II 2 GD IIC T4 (X) / EX II 2 GD IIB T4 (X) / EX II 2 GD IIC T4 (X). Additional resistance can be offered with copper platings and stainless steel components
- Trolleys can be offered with 100% Stainless Steel Side Plates and Solid Bronze Wheels
| SPECIFICATIONS - ATS AIR CHAIN HOIST - 0.25ton - 2ton | 0.25 | 0.5 | 1 | 2 | |
|---|---|---|---|---|---|
| Lifting Capacity | mt | 0.25 | 0.5 | 1 | 2 |
| T | 0.27 | 0.55 | 1.1 | 2.2 | |
| Number of Fall of Chain | 1 | 1 | 1 | 1 | |
| Motor Power Output | H.P. | 1.9 | 1.9 | 1.9 | 2.4 |
| kW | 1.4 | 1.4 | 1.4 | 1.8 | |
| Weight with Pull Cord | lbs. | 55 | 55 | 64 | 72 |
| Weight with Pilot Pendant | lbs. | 62 | 62 | 71 | 79 |
| Chain Weight Per Additional Foot of Lift | lbs. | 0.75 | 0.75 | 0.75 | 1.5 |
| Chain Dimension | mm | 7x21 | 7x21 | 7x21 | 9x27 |
| Air Pressure | PSI | 87 | 87 | 87 | 87 |
| bar | 6 | 6 | 6 | 6 | |
| Air Consumption at Full Load | cfm | 60-75 | 60-75 | 60-75 | 95 |
| m3/min | 1.75 | 1.75 | 1.75 | 1.75 | |
| Air Hose Connection | 1" BSP | ||||
| Air Hose Dimension | 3/4" (19mm - 25mm) | ||||
| Lifting Speed at Full Load | ft. / min. | 89 | 62 | 19 | 29 |
| Lifting Speed without Load | ft. / min. | 98 | 98 | 26 | 43 |
| Lower Speed with Full Load | ft. / min. | 108 | 108 | 24 | 45 |
| Standard Lift | ft. | 10 | 10 | 10 | 10 |
| Length of Control for Standard Lift | ft. | 6.5 | 6.5 | 6.5 | 6.5 |
| Noise Level | 84 Dba @ 1m |
